GOODYEAR AIRCRAFT TIRE MANUAL and TIRE DATA : (and) a guide for inspecting, maintaining and mounting aircraft tires
Widerøe
Bok Engelsk
| Utgitt | Akron, Ohio : GOOD YEAR AVIATION PRODUCTS
|
|---|---|
| Opplysninger | There are no publishing date on the items. There are 3 different items with different names.. - TABLE OF CONTENTS: LETTER FROM GOODYEAR TO WIDERØE SERVICE LETTER a guide for inspecting, maintaining and mounting aircraft tires Contents: Purpose of Guide Aircraft Tire Construction Tread Wear Symptoms and Causes Tread Conditions Cut or Snag Blister Open Tread Splice Tread Flaking and Chipping Tread Chunking Peeled Rib Fabric Fraying Thrown Tread Skid Tread Rubber Reversion Tread Separation Groove Cracking and Rib Undercutting Chevron Cutting Sidewall Conditions Cut or Snag Circumferential Cracks Radial Cracks Sidewall Separation Weather Checking Bead Conditions Brake Heat Damage Kinked Bead Carcass Conditions Liner Breakdown Impact Break Mounting and Demounting Fusible Plugs Handling Beads Bead Lubrication Wheel Balance Tools and Accessories Preventive Maintenance Inflation Checking Pressure Data Climate Adjustments Loaded Inflation Mounted Tubed Tires Mounted Tubeless Tires Nylon Stretch Dual Pressure RTO Procedures AIRCRAFT TIRE MANUAL Section Contents 1. INTRODUCTION 2. GENERAL DATA 2.1 Aircraft Tire Construction 2.2 Tire Markings 2.3 Tire Schematic 2.4 Tire Types 2.5 Tread Patterns 2.6 Product Lines 2.7 Current Deisgn 2.8 Aircraft Tubes 3. PREVENTIVE MAINTENANCE 3.1 Inflation Pressure 3.2 Special Procedures After a Rejected Takeoff 3.3 Matching Dual Tires 3.4 Protecting Tires from Chemicals and Exposure 3.5 Condition of Airport Surfaces 4. MOUNTING AND DEMOUNTING 4.1 Manufacturer's Instructions 4.2 Safety Precautions with Split Wheels 4.3 Demounting Tires from Split Wheels 4.4 Mounting Tubeless Tires on Split Wheels 4.5 Mounting Tube-Type Tires on Split Wheels 4.6 Wheel Tire Assembly Balancing 5. INSPECTION, REPAIR AND STORAGE 5.1 Tread Wear Patterns 5.2 Tread Conditions 5.3 Sidewall Conditions 5.4 Bead Conditions 5.5 Carcass Conditions 5.6 Inspecting Mounted Tires 5.7 Inspecting Demounted Tires 5.8 Air Loss in Tubeless Tires 5.9 Tube Inspection and Repair 5.10 Retreading 5.11 Tire and Tube Storage 5.12 Tire and Tube Age Limit 5.13 Tire Incident Report 6. TECHNICAL DATA 6.1 Tire Size Selection 6.2 Inflation Under Load 6.3 Tire Measuring Procedures 6.4 Operating Tire Temperatures 6.5 Load Ratings for Beaching Gear of Helicopters 6.6 Radius of Gyration 6.7 Standard Growth Allowance 6.8 Minimum Clearance Allowance 6.9 High-speed Considerations 6.10 Tread Conditions 7. CAPABILITIES AND FACILITIES 7.1 Management 7.2 Engineering 7.3 Testing 7.4 Quality Control 7.5 Tire Production Sources AIRCRAFT TIRE DATA Section Contents 1. INTRODUCTION 2. DEFINITIONS AND ABBREVIATIONS 3. QUALIFICATION SPECIFICATION 4. DATA SECTION - TIRES 5. DATA SECTION - TUBES 6. SERIAL NUMBER CODES - TIRES 6.1 U.S.A. Commercial and Military 6.2 International Commercial 6.3 International Military 7. APPLICATION CHARTS 7.1 General Aviation/Business Aircraft 7.2 Commercial Aircraft 7.3 Military Aircraft
|
| Emner |
